Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on Alfa Romeo Giulietta 1.4

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Timing belt

Video tutorial

Today, discover the main instructions on how to remove and replace the timing belt on an Alfa Romeo Giulietta 1.4. First, open the car's bonnet and start removing the engine mount by unscrewing the fixing bolts; then raise the vehicle and remove the front right wheel, also taking off the wheel arch liner.

At this point, disconnect the V-belt, followed by removing the crankshaft pulley; remove the timing cover to access the timing belt, then proceed with the replacement, following the video tutorial to the end!


Posted on 12 June 2026 by ScegliAuto


Related tutorials

How to replace the timing belt of the Alfa Romeo Giulietta
How to replace the timing belt of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) The replacement of the timing belt is a complex job that requires attention and patience. To carry out the replacement of the timing belt of the Alfa…
How to Replace the Timing Belt on an Alfa Romeo Giulietta 1.4 MultiAir
How to Replace the Timing Belt on an Alfa Romeo Giulietta 1.4 MultiAir
Alfa Romeo Giulietta (2010-2020 / MK 1) Today, we will look at how to remove and replace the timing belt on an Alfa Romeo Giulietta 1.4 MultiAir. First, open the engine bonnet and begin by …
Replacing the Timing Belt on Alfa Romeo Giulietta 2.0 JTDM
Replacing the Timing Belt on Alfa Romeo Giulietta 2.0 JTDM
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video, we will see all the steps required to replace the timing belt, as well as perform a complete service (oil change, filters, alternat…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos