Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

Video tutorial

In today's video, we will see how to reset the service on the Alfa 159. Insert the key into the ignition and press the start & stop button once. Press the button on the instrument panel to enter the menu and select the corresponding option.

Now, continue pressing the button until you see the desired option on the display. Press once and then hold for 5 seconds to confirm the oil life reset.

Confirm the selection and then exit the menu. Turn off the instrument panel.

Now, if you restart the vehicle, you will no longer see the message.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Alfa Romeo 159
How to Reset the Service Light on the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In this guide, learn how to reset the expired service warning on the Alfa Romeo 159 saloon. This operation is necessary after performing a service on…
How to Reset the Service Light on an Alfa Romeo 159
How to Reset the Service Light on an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) To reset the service light on an Alfa Romeo 159, you need to use a computer with a specific diagnostic program, which must be connected to the vehicl…
How to Remove the Starter Motor from an Alfa Romeo 159?
How to Remove the Starter Motor from an Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) Before you can begin, open the bonnet of your Alfa Romeo 159. Start by removing the hoses and collectors located above the starter motor by unscrewin…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos