Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

Video tutorial

In this guide, learn how to reset the expired service warning on the Alfa Romeo 159 saloon. This operation is necessary after performing a service on your vehicle, confirming to the system that scheduled maintenance has been completed.

Enter the car and turn on the ignition. With the key inserted (keeping the engine off), press the accelerator pedal to the floor for 30 seconds while simultaneously pressing the brake pedal 6 times.

Upon restarting, the warning will disappear.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Light on the Alfa Romeo 159 - Brera
How to Reset the Engine Oil Light on the Alfa Romeo 159 - Brera
Alfa Romeo 159 (2005-2011 / MK 1) Today, you will discover the steps to reset the service light for routine maintenance of the oil change on the Alfa Romeo 159, as well as on the Brer…
Reset the Service Light on the Alfa Romeo 159
Reset the Service Light on the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Below are the steps to reset the service light for the regular maintenance oil change on the Alfa Romeo 159. First, get inside the vehicle and turn o…
How to Remove the Rear Light of an Alfa Romeo 159
How to Remove the Rear Light of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos