Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on the Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

Video tutorial

Below are the steps to reset the service light for the regular maintenance oil change on the Alfa Romeo 159. First, get inside the vehicle and turn on the ignition; then use the buttons on the left-hand stalk to access the settings menu, scrolling through the options until you reach the engine oil reset option, as shown in the video.

At this point, confirm and execute the service reset, ensuring that the warning is reset on the instrument panel; then start the engine!


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on an Alfa Romeo 159?
How to Reset the Service Light on an Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) To reset the service light on an Alfa Romeo 159, insert the ignition key into the ignition switch, turning it to power on the dashboard and check tha…
How to Reset the Engine Oil Light on the Alfa Romeo 159 - Brera
How to Reset the Engine Oil Light on the Alfa Romeo 159 - Brera
Alfa Romeo 159 (2005-2011 / MK 1) Today, you will discover the steps to reset the service light for routine maintenance of the oil change on the Alfa Romeo 159, as well as on the Brer…
Reset Service Light on Alfa Romeo 159
Reset Service Light on Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video, you will learn how to reset the maintenance light for the oil change on an Alfa Romeo 159, following the instructions below. First,…

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos