Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : The oil change and engine filter replacement in a 2006 Alfa Romeo 159.

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Engine oil
Operation: The oil change and engine filter replacement in a 2006 Alfa Romeo 159.

In this video tutorial, we can see how to perform an engine oil and oil filter change on a 2006 Alfa Romeo 159 with a damaged drain plug. To reach the oil pan bolt, we need a hex key; we need to remove the engine support, then use a hydraulic jack to lift the engine and bring it above the chassis bar; place a container to collect the used oil under the oil pan, unscrew the drain plug and wait for all the oil to drain. If your car's plug is damaged, replace it with a new one, without tightening it too much; then reassemble the engine support. Now, we need to unscrew the old oil filter with a filter wrench; replace the old gaskets on the oil filter, screw in the new oil filter (initially by hand, then finish with the filter wrench). Remove the hydraulic jack and add engine oil (0W-30 for 4.6 liters).


Posted on 8 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 159 2005-2011 - Where is the oil filter located on the Alfa Romeo 159 1.9 jtdm? Read Answer
    • 159 2005-2011 - Where is the Alfa Romeo 159 oil sensor located? Read Answer
    • 159 2005-2011 - How many liters of oil are needed for the maintenance of the Alfa Romeo 159 1.9 jtdm? Read Answer
    • 159 2005-2011 - How many liters of engine oil go into the Alfa 159 JTDm? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos