Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the radio in the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

Video tutorial

In this tutorial video, you can see how to replace the radio in the Alfa Romeo Giulietta. First, prepare the necessary materials: screwdrivers and sockets suitable for removing the screws, and tools for removing plastic parts.

Then, run a plastic trim tool along the entire perimeter of the cover until you detach the clips, then remove the trim from above the dashboard. Once the plastic cover is removed, you will find the radio in the dashboard.

For the radio, you need to unscrew the 4 Torx screws, then release the radio from both sides and pull it out of the dashboard and disconnect the cables (electrical connectors). Now, install the cage.

Secure the cage in the centre console. Bend all the pre-cut tabs to secure the radio and connect the cables.

Turn on the radio to check its operation.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today, you will learn how to remove and replace the standard radio in an Alfa Romeo Giulietta by following the instructions below. First, get in the …
How to Replace the Air Filter of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos