Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil filter located in the Alfa Romeo 159?

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Oil filter

This video shows where the oil filter is located in the Alfa Romeo 159 and how to proceed if you need to replace it. The operation is very simple and should always be done alongside an oil change. As demonstrated, the filter is located in the central rear area of the engine, just in front of the windscreen. To access and remove it, first take off the plastic cover, then unscrew the housing with a 36mm socket. Of course, you will need to drain the system through the designated hole at the bottom of the engine.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials
…
Replacing Engine Oil and Oil Filter on Alfa Romeo 159
Replacing Engine Oil and Oil Filter on Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In this video, you will learn how to replace the engine oil and oil filter on the Alfa Romeo 159. First, open the bonnet and lift the vehicle. Unscre…
How to replace the engine oil and oil filter of the Alfa Romeo 159 1.9 JTDm
How to replace the engine oil and oil filter of the Alfa Romeo 159 1.9 JTDm
Alfa Romeo 159 (2005-2011 / MK 1) Today we will see the instructions that will allow us to carry out the ordinary maintenance service, replacing the engine oil and oil filter, of the …

Other guides you may be interested in

    Frequently Asked Questions

    • 159 2005-2011 - Where is the oil filter of an Alfa Romeo 159 1.9 jtdm located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos