Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Oil Change Service Light on the Alfa 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Warning light – error code

To reset the service light on the vehicle using an OBD2 diagnostic system, follow these instructions: take your diagnostic system and connect it to the vehicle's port located at the bottom left of the steering wheel, then connect the device to the PC. Wait for the data to load, select the vehicle model, and wait for the check and data acquisition from the ECU to complete. Insert the key to turn on the ignition, and at this point, the list of errors will appear on the PC, allowing you to proceed with their deletion. Simultaneously, the reset indicator will turn off on the vehicle's dashboard.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the Service Light on the Alfa Romeo 159
Reset the Service Light on the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Below are the steps to reset the service light for the regular maintenance oil change on the Alfa Romeo 159. First, get inside the vehicle and turn o…
How to Reset the Service Light on the Alfa Romeo 159
How to Reset the Service Light on the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video tutorial, you will see how to reset the maintenance light for the oil change on the Alfa Romeo 159, as well as on all other models f…
Reset Service Light on Alfa Romeo 159
Reset Service Light on Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video, you will learn how to reset the maintenance light for the oil change on an Alfa Romeo 159, following the instructions below. First,…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos