Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Warning Light on the Alfa Romeo Mito 1.6

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

Video tutorial

After completing a full service with oil and filter replacement, it is important to reset the oil warning light; otherwise, the car will continue to indicate that an oil change is needed. Today, this brief video tutorial will explain how to reset the oil warning light on the Alfa Romeo Mito. First, turn on the ignition without starting the engine, press the accelerator pedal fully, and then press the brake pedal seven times.

Next, release the accelerator pedal and turn off the ignition.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Alfa Romeo Mito (2008-2018 / MK 1) To reset the oil light on your Alfa Romeo MiTo, you cannot follow a manual procedure, as it is necessary to connect a diagnostic tool to the vehicle'…
Alfa Romeo Mito (2008-2018 / MK 1) If you want to know how to reset the oil change warning light on your Alfa Romeo Mito, simply read this guide carefully and follow the instructions. …
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos