Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on a 2021 Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

This video is currently unavailable

To correctly complete the manual reset of the engine oil light on your 2021 Alfa Romeo Stelvio, follow the steps described in this procedure. First, enter the cabin and sit in the driver's seat.

Then, insert the key and turn on the ignition. Wait for the instrument panel to fully light up, then press the accelerator pedal ten consecutive times.

Once done, turn off and then turn on the ignition of your Alfa Romeo Stelvio to complete the manual reset procedure for the oil light.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this brief guide, you will find instructions on how to perform routine maintenance and reset the engine oil light on the Alfa Romeo Stelvio, as we…
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) If the orange oil light on the instrument panel of your Alfa Romeo Stelvio stays on even after an oil change, proceed with this simple manual reset. …
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Follow these steps to reset the engine oil maintenance light on your Alfa Romeo Stelvio. First, get in the vehicle and press and hold the brake pedal…

Other guides you may be interested in

    Frequently Asked Questions

    • Alfa Romeo Stelvio 2016-2024 - How do you reset the Alfa Romeo Stelvio Service warning light? Read answer

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos