Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on an Aprilia Tuono 1100?

Model: Aprilia Tuono V4 1100rr
Part: Engine oil

Video tutorial

To change the engine oil on an Aprilia Tuono 1100, start by placing the bike on a stable stand to ensure it is well balanced. It is important that the engine has been warmed up before the procedure to allow the oil to flow better during draining.

Once warmed, locate the oil drain plug situated at the bottom of the engine. Position an appropriate container under the plug to collect the old oil. Carefully unscrew the drain plug using the correct spanner, taking care not to burn yourself with the hot oil. Allow all the oil to drain completely from the engine, taking the necessary time to ensure the flow is complete.

When the oil has stopped flowing, replace the drain plug, tightening it properly. At this point, you can proceed to fill the engine with new oil, ensuring you use the type and quantity specified for the Aprilia Tuono 1100. Once the topping up is complete, start the bike for a few minutes to allow the oil to circulate.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Tuono V4 1100rr As seen in this tutorial, changing the engine oil in an Aprilia Tuono V4 1100 RR is an extremely simple and quick operation. First, wait for the engi…
Tuono V4 1100rr To replace the front headlamp bulb on the Aprilia Tuono 1100 V4, turn the handlebars to the opposite side of the bulb to be replaced. This will allow…
Tuono V4 1100rr To replace the indicator bulb on the Aprilia Tuono V4 1100, loosen the screws securing the glass cover of the light. This will allow you to extract t…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos