Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulb on the Aprilia Tuono V4 1100?

Model: Aprilia Tuono V4 1100rr
Part: Light bulb

Video tutorial

To replace the indicator bulb on the Aprilia Tuono V4 1100, loosen the screws securing the glass cover of the light. This will allow you to extract the actual headlight and disconnect the red and blue wires, both connected to the headlight.

Now, connect the new bulb to the wires, which should then be inserted into the designated housing in the light. After installing the new bulb, secure the glass of the light with the appropriate screw and check the correct functioning of the component.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Aprilia Tuono 1100 V4
How to Replace the Front Headlamp Bulb on the Aprilia Tuono 1100 V4
Tuono V4 1100rr To replace the front headlamp bulb on the Aprilia Tuono 1100 V4, turn the handlebars to the opposite side of the bulb to be replaced. This will allow…
How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?
How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?
Tuono V4 1100rr In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proce…
How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
How to remove the rear wheel of the Aprilia Tuono V4 1100 Factory.
Tuono V4 1100rr The instructions in this guide will show us how to disassemble and remove the rear wheel of the Aprilia Tuono V4 1100 Factory motorcycle. First, let'…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos