Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear brake pads on the Aprilia Pegaso 650?

Model: Aprilia Pegaso 650
Part: Brake pads

Video tutorial

To replace the rear brake pads on the Aprilia Pegaso 650, you need to loosen the screws that secure the brake caliper to its housing, positioned in line with the disc. Once the securing screws are loosened, you can proceed to slide the caliper off the disc and remove the pin that holds the pads inside.

This will allow you to insert the new pads into their slot so that they can be positioned on the disc and secured with the screws. After installation, you should check that everything functions correctly.


Posted on 30 December 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on an Aprilia Pegaso 650
How to Replace the Front Brake Pads on an Aprilia Pegaso 650
Pegaso 650 To replace the front brake pads on an Aprilia Pegaso 650, loosen the screws securing the brake caliper in its housing on the respective disc. Once th…
How to replace the front brake pads on the Aprilia Pegaso 650?
How to replace the front brake pads on the Aprilia Pegaso 650?
Pegaso 650 You can replace the front brake pads on the Aprilia Pegaso 650 by loosening the bolts that secure the brake caliper to its housing: once the bolts ar…
How to Change the Engine Oil in the Aprilia Pegaso 650?
How to Change the Engine Oil in the Aprilia Pegaso 650?
Pegaso 650 In this tutorial, you will see how to change the engine oil in the Aprilia Pegaso 650, a very simple and quick operation. First, wait for the engine …

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos