Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on an Aprilia Sportcity

Model: Aprilia Sportcity 250
Part: Engine oil

Video tutorial

In this short video, learn how to change the engine oil and filter on your Aprilia Sportcity. Before starting, place a container under the scooter to collect the used oil. First, using a 17mm spanner, unscrew the drain plug and remove the mesh (clean it with some petrol).

While the used oil drains, unscrew the oil filter using a strap wrench. Refit the drain plug and the oil filter.

Finally, unscrew the filler cap and, using a funnel, pour in the new oil.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil on an Aprilia Sportcity
How to Replace the Engine Oil on an Aprilia Sportcity
Sportcity 250 In this short video, learn how to change the engine oil on your Sportcity 250. With a bit of effort, you can do it without professional help. Start b…
Changing the transmission oil of the Aprilia Sportcity 250 ie
Changing the transmission oil of the Aprilia Sportcity 250 ie
Sportcity 250 Here are the necessary instructions to change the transmission oil of the Aprilia Sportcity 250 ie scooter, following these simple and quick steps. F…
Changing the Engine Air Filter on an Aprilia Sportcity 250 Scooter
Changing the Engine Air Filter on an Aprilia Sportcity 250 Scooter
Sportcity 250 Change the engine air filter on an Aprilia Sportcity 250 scooter. Follow this guide to proceed with the filter change. Position the scooter on the ce…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos