Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil on an Aprilia Sportcity

Model: Aprilia Sportcity 250
Part: Engine oil

Video tutorial

In this short video, learn how to change the engine oil on your Sportcity 250. With a bit of effort, you can do it without professional help. Start by placing a container under the scooter to collect the used oil. Unscrew the oil filter using a flathead screwdriver, then move on to the drain plug attached to the filter (there's a mesh in the drain plug; it's advisable to clean it with some fuel).

After draining all the oil, refit the filter and the plug, and then pour in the new oil through the oil filler cap.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on an Aprilia Sportcity
How to Replace the Engine Oil and Oil Filter on an Aprilia Sportcity
Sportcity 250 In this short video, learn how to change the engine oil and filter on your Aprilia Sportcity. Before starting, place a container under the scooter to…
Changing the transmission oil of the Aprilia Sportcity 250 ie
Changing the transmission oil of the Aprilia Sportcity 250 ie
Sportcity 250 Here are the necessary instructions to change the transmission oil of the Aprilia Sportcity 250 ie scooter, following these simple and quick steps. F…
How to Replace the Exhaust on an Aprilia Sportcity 250
How to Replace the Exhaust on an Aprilia Sportcity 250
Sportcity 250 To replace the exhaust on an Aprilia Sportcity 250, loosen the screws that secure the exhaust to its housing: these screws will be located at the bot…

How to Replace the Front Shock Absorber Seals on a Derbi Senda?

To replace the front shock absorber seals on a Derbi Senda, completely remove the shock absorber by undoing the bolts that secure it to the steering and then those that attach it to the corresponding front wheel. Once the shock absorber is fully removed, disconnect the piston from the hollow cylinder at the bottom of the shock absorber. Now the seal will be accessible, and you can remove it from its housing using a lever tool; finally, insert the new seals and reassemble the shock absorber.

Watch the video!


by ScegliAuto

More videos