Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on an Aprilia Caponord?

Model: Aprilia Caponord
Part: Engine oil

Video tutorial

You can change the engine oil on an Aprilia Caponord by unscrewing the drain plug located at the central lower part of the vehicle: once the plug is removed, all the used oil can flow into a suitably placed container. Then, you will also need to remove the old oil filter from its seat to insert the new one. At this point, proceed with topping up by pouring the necessary amount of oil through the breather on the right side of the bike: you can then start the engine to check that everything is functioning.


Posted on 27 April 2026 by ScegliAuto


Related tutorials

Caponord This guide will show you the procedure to replace the engine oil and oil filter on an Aprilia Caponord 1000 in simple and quick steps. First, place y…
Caponord This guide provides instructions on how to remove and replace the clutch discs on the Aprilia Caponord in simple steps. First, undo the oil drain bol…
Caponord To replace the air filter on an Aprilia Caponord, you need to loosen the screws that secure the seat to its housing, allowing you to completely remov…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos