Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear tyre on the Aprilia Tuareg 660

Model: Aprilia Tuareg 660
Part: Tires

Video tutorial

In this guide, we will provide instructions for removing and replacing the rear tyre on the Aprilia Tuareg 660. First, place the motorcycle on a stand and begin unscrewing the central nut of the rear wheel while lifting it off the ground; then disconnect the brake caliper and the drive chain, removing the central pin to take off the wheel, as illustrated in the video.

At this point, use levers to remove the tyre from the rim if you do not have the appropriate machinery; fit the new tyre and finally reattach the wheel!


Posted on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Sprocket of the Aprilia Tuareg 660
How to Replace the Sprocket of the Aprilia Tuareg 660
Tuareg 660 Today, we will look at the instructions for removing and replacing the transmission sprocket of the Aprilia Tuareg 660, as well as the RS 660. First,…
How to Adjust the Headlights on the Aprilia Tuareg 660?
How to Adjust the Headlights on the Aprilia Tuareg 660?
Tuareg 660 In this tutorial, you will see how to adjust the headlights on the Aprilia Tuareg 660, a very simple and quick operation. First, position the motorcy…
How to Replace the Air Filter on an Aprilia Tuareg 660
How to Replace the Air Filter on an Aprilia Tuareg 660
Tuareg 660 In this brief guide, we will discover the instructions on how to remove and replace the engine air filter on the Aprilia Tuareg 660. First, place the…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos