|
Do it yourself
| |||
| ||||
How to Top Up the Coolant in an Aprilia Scarabeo 400
Model: Aprilia Scarabeo 400
Video tutorial
In this brief guide, you will learn how to top up the coolant in the Aprilia Scarabeo 400 engine. First, place the scooter on its centre stand and begin removing the plastic cover found at the top right, under the handlebars. Inside, you will find the coolant reservoir; unscrew the cap to top it up (fill to the maximum level), as shown in the video. At this point, start the engine and check the level, topping up if necessary; then refit the plastic cover.
Posted on 30 August 2026 by ScegliAuto
Related tutorials
Scarabeo 400
Today's guide will show you how to replace the coolant in the Aprilia Scarabeo 400 scooter in simple and quick steps. First, place the scooter on its…
Scarabeo 400
To replace the transmission of the Aprilia Scarabeo 400, loosen the screws securing the cover on the left side of the bike, near the rear wheel. Once…
Scarabeo 400
Today's guide shows you how to change the gear oil on the Aprilia Scarabeo 400 scooter. First, place the scooter on its centre stand and start unscre…
|
How to Change the Gear Oil on a Vespa 125 LX?
To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
