Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Gear Oil on an Aprilia Scarabeo 400

Model: Aprilia Scarabeo 400
Part: Transmission fluid

Video tutorial

Today's guide shows you how to change the gear oil on the Aprilia Scarabeo 400 scooter. First, place the scooter on its centre stand and start unscrewing the oil drain bolt located under the transmission cover, allowing it to drain into a container for about ten minutes; then unscrew the filler cap, removing the dipstick as shown in the video.

At this point, top up with the correct new gear oil (in this case, 75W90); pour in the correct amount, equivalent to 250 ml of oil!


Updated on 20 July 2026 by ScegliAuto


Related tutorials

Scarabeo 400 In this tutorial, you will see how to replace the oil filter on the Aprilia Scarabeo 400 scooter, a very simple operation that must be done alongside…
Scarabeo 400 Today, we will go through the step-by-step instructions on how to disassemble the forks and replace the oil on the Aprilia Scarabeo 400 scooter. Firs…
Scarabeo 400 This guide shows how to replace the front headlight bulb on the Aprilia Scarabeo 400 scooter. After securing the vehicle, use a cross-head screwdrive…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos