Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fork Oil on an Aprilia Scarabeo 400

Model: Aprilia Scarabeo 400
Part:

Video tutorial

Today, we will go through the step-by-step instructions on how to disassemble the forks and replace the oil on the Aprilia Scarabeo 400 scooter. First, place the scooter on the centre stand and begin unscrewing the 6 mm hex screw of the fork; remove the brake caliper and then disassemble the front wheel.

At this point, unscrew the fork screws to extract them; then remove the fork stanchions, replacing both the seals and dust covers; replace the front fork oil and reassemble everything, following the video tutorial to the end!


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on an Aprilia Scarabeo 400 Scooter?
How to Replace the Oil Filter on an Aprilia Scarabeo 400 Scooter?
Scarabeo 400 In this tutorial, you will see how to replace the oil filter on the Aprilia Scarabeo 400 scooter, a very simple operation that must be done alongside…
How to Change the Gear Oil on an Aprilia Scarabeo 400
How to Change the Gear Oil on an Aprilia Scarabeo 400
Scarabeo 400 Today's guide shows you how to change the gear oil on the Aprilia Scarabeo 400 scooter. First, place the scooter on its centre stand and start unscre…
How to Replace the Front Headlight Bulb on the Aprilia Scarabeo 400
How to Replace the Front Headlight Bulb on the Aprilia Scarabeo 400
Scarabeo 400 This guide shows how to replace the front headlight bulb on the Aprilia Scarabeo 400 scooter. After securing the vehicle, use a cross-head screwdrive…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos