Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the transmission oil in the Aprilia SR 125 scooter?

Model: Aprilia Sr 125
Part: Transmission fluid

Video tutorial

In this tutorial, you will see how to change the transmission oil in the Aprilia SR 125 scooter, a very simple and quick operation. First, ensure that the engine is sufficiently cool to operate safely, then position a container underneath the transmission casing, locate the fill hole bolt, and unscrew it with an Allen key. Next, unscrew the drain hole bolt, allow all the oil in the system to drain out, and tighten the bolt.

At this point, simply pour in the necessary amount of oil, using a large syringe if needed.


Posted on 5 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Aprilia SR 125 Scooter?
How to Change the Engine Oil on the Aprilia SR 125 Scooter?
Sr 125 In this tutorial, you will see how to change the engine oil on the Aprilia SR 125 scooter, a very simple and quick operation. First, ensure that the …
How to Change the Engine Oil of the Aprilia SR 125
How to Change the Engine Oil of the Aprilia SR 125
Sr 125 Follow this guide to perform the routine maintenance service by changing the engine oil and oil filter of the Aprilia SR 125 scooter. First, place th…
How to Change the Engine Oil on an Aprilia SR 125?
How to Change the Engine Oil on an Aprilia SR 125?
Sr 125 To change the engine oil on your Aprilia SR 125, position the bike on a flat surface. Remove the drain plug to drain the used oil. Once the oil has c…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos