Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Rs 125
Part: Brake pads

In today’s tutorial video, you will learn how to remove and replace the front brake pads on an Aprilia RS 125. First, remove the plastic cover of the brake caliper using a flat screwdriver: then remove the sealing ring of the brake caliper and use pliers to remove the internal pin. At this point, pull out the brake pads, also extracting the mechanism inside the caliper. Replace them with new ones (using original parts or a good quality type of pads) and reassemble them following the video until the end!

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Starter Motor of the Aprilia RS 125
Rs 125 In this video tutorial, you will see how to disassemble and replace the starter motor of the Aprilia RS 125 motorcycle. First, place your motorcycle …
How to Replace the Spark Plug on an Aprilia RS 125
How to Replace the Spark Plug on an Aprilia RS 125
Rs 125 Before you begin, position your Aprilia RS 125 vertically. Start by removing the rider's seat using the key. Next, dismantle the fuel tank by unscrew…
How to Reset the Service Light on an Aprilia RS 125
How to Reset the Service Light on an Aprilia RS 125
Rs 125 Briefly, follow these steps to reset the service light for the regular maintenance oil change on the Aprilia RS 125. First, place the bike on its sta…

How do you replace the headlight bulb of the Kymco Downtown 300i?

In order to replace the headlight bulb of the Kymco Downtown 300i, it is necessary to loosen the screws that secure the panels located at the front of the vehicle fairing: once the fixing screws of these panels have been loosened, those on the inside of the front fairing can be unscrewed, so that the latter can be removed from its housing. Now it will be possible to proceed by unscrewing the screws that secure the corresponding headlight, disconnecting the connector and removing the bulb inside; in this way the fairings can be reinstalled.

Watch the video!


by ScegliAuto

More videos