Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Rs 125
Part: Brake pads

This guide provides instructions on how to remove and replace the rear brake pads on an Aprilia RS 125 motorcycle. First, place your motorcycle on the centre stand and begin unscrewing the bolts securing the rear brake caliper. Then, remove the caliper from the brake disc, thus taking out the old pads as shown in the video. At this point, lever the piston of the caliper and clean off any dirt. Finally, install the new brake pads and reassemble everything by reversing the disassembly procedure!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Performing a Rear Brake System Revision on the Aprilia RS 125
Performing a Rear Brake System Revision on the Aprilia RS 125
Rs 125 In this video tutorial, you will learn how to carry out a revision of the brake system and replace the brake pump and pads on the Aprilia RS 125 moto…
Replacing Brake Pads on Aprilia RS 125
Replacing Brake Pads on Aprilia RS 125
Rs 125 In today’s tutorial video, you will learn how to remove and replace the front brake pads on an Aprilia RS 125. First, remove the plastic cover of the…
How to Replace the Front Brake Disc on an Aprilia RS 125
How to Replace the Front Brake Disc on an Aprilia RS 125
Rs 125 Discover the main steps in this guide that will allow you to remove and replace the front brake disc, as well as the pads, on the Aprilia RS 125. Fir…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos