Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to disassemble and replace the sprocket and crown on an Aprilia Dorsoduro 750 by following these simple instructions. First, remove the clutch pump connector and then unscrew the screws of the sprocket cover; next, proceed to unscrew the sprocket bolt and remove the wheel adjuster by pulling the wheel forward and removing the chain. At this point, remove the wheel and extract the sprocket; unscrew the screws securing the crown, replacing it with the new one. All that’s left is to fit the sprocket and reassemble everything!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on an Aprilia Dorsoduro 750
How to Reset the "Service" Light on an Aprilia Dorsoduro 750
Dorsoduro 750 Before you can begin, sit on the seat of your Aprilia Dorsoduro 750. Start by activating the instrument panel by turning the key in the ignition swit…
How do you replace the motor oil of the Aprilia Dorsoduro 750?
How do you replace the motor oil of the Aprilia Dorsoduro 750?
Dorsoduro 750 To perform the oil change on the Aprilia Dorsoduro 750, you will need to loosen the drain plug of the oil pan located in the central lower part of th…
How to Change the Engine Oil on an Aprilia Dorsoduro 750
How to Change the Engine Oil on an Aprilia Dorsoduro 750
Dorsoduro 750 To change the engine oil on an Aprilia Dorsoduro 750, you need to unscrew the drain plug of the oil tank, which is located at the bottom of the bike:…

How to Dismantle the TM Racing KZ R1 Engine?

To dismantle the TM Racing KZ R1 engine, first remove the block from its housing by unscrewing the screws that secure it to the supports and disconnecting all hoses and connectors attached to it. Once the engine block is freed, unscrew the screws securing the cylinder at the top of the block. This will allow you to remove the piston from its conrod, and then you can unscrew the screws that hold the two half-cases of the engine. You can then remove and replace all internal components, reassembling all parts afterwards.

Watch the video!


by ScegliAuto

More videos