Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on the Aprilia Dorsoduro 750

Model: Aprilia Dorsoduro 750
Part: Air filter

Video tutorial

Below, you will see how to remove and replace the air filter on the Aprilia Dorsoduro 750 engine. First, place the stand on your bike and start unscrewing the screws securing the fuel tank, also removing the rider's seat to take it off; then disconnect the fuel line and the electrical connector.

At this point, unscrew the screws of the air filter box cover and remove the filter cartridge; replace it with the new one, ensuring it is inserted the correct way, and finally reassemble the fuel tank!


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on an Aprilia Dorsoduro 750
How to Replace the Air Filter on an Aprilia Dorsoduro 750
Dorsoduro 750 The following are the main steps for removing and replacing the air filter on an Aprilia Dorsoduro 750 motorcycle. First, place the bike on its stand…
How to Replace the Engine Oil and Oil Filter on Aprilia Dorsoduro 750
How to Replace the Engine Oil and Oil Filter on Aprilia Dorsoduro 750
Dorsoduro 750 Today we will look at how to carry out routine maintenance by replacing the engine oil and oil filter on the Aprilia Dorsoduro 750. First, place the …
How to replace the engine oil and oil filter of the Aprilia Dorsoduro 750
How to replace the engine oil and oil filter of the Aprilia Dorsoduro 750
Dorsoduro 750 Today's process will show us how to perform the routine maintenance check, replacing the motor oil and oil filter of the Aprilia Dorsoduro 750 motorc…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos