Do it yourself
Frequently asked questions about cars and motorcycles
In today's tutorial video, you will see the steps to remove and replace the engine spark plug on an Aprilia Sportcity 125 scooter, in simple and quick steps. First, remove the seat of your scooter by lifting it and unscrewing the hinge screws; then remove the plastic cover of the battery compartment and unscrew all the side screws of the under-seat compartment to take it off, as shown in the video. At this point, remove the plastic covers found at the bottom; take off the spark plug cap and unscrew it with a socket spanner to remove and replace it!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Sportcity 125 In this guide, you will learn how to remove and replace the spark plug coil on the Aprilia Sportcity 125 scooter. First, place the scooter on the cen…
Sportcity 125 Below are the steps that will allow you to remove and replace (or clean) the air filter of the engine of the Aprilia Sportcity 125 scooter. First, pl…
Sportcity 125 In this short and simple guide, you will learn how to dismantle and replace the front wheel or tyre of the Aprilia Sportcity 125 scooter. First, plac…

How to replace the engine oil and oil filter of the Kawasaki ZR 7

This guide will show you how to replace the engine oil and oil filter while performing the routine maintenance service on the Kawasaki ZR 7 motorcycle. First, place your motorcycle on the centre stand and start by loosening the oil drain bolt, allowing the oil to drain into a container for about ten minutes. Then, use the appropriate spanner to unscrew and replace the oil filter cartridge with a new one, as shown in the video. At this point, unscrew the filler cap and pour in the suitable oil for your engine, as indicated in your motorcycle's manual!

Watch the video!


by ScegliAuto

More videos