Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Change on Aprilia Dorsoduro 750

Model: Aprilia Dorsoduro 750
Part: Engine oil

Video tutorial

Start the engine for a few minutes before changing the oil to make it more fluid, facilitating the subsequent draining. Unscrew the bolt underneath the oil sump as initially shown in the video, then collect the used lubricant in a container.

While the oil drains, clean the bolt that acts as a plug for the drain hole and unscrew the oil filter. Lubricate the O-ring of the new filter before fitting it. Close the oil drain hole and fill with 3.2 litres of 15W-50 oil through the upper hole of the oil sump.

This is a simple task that is within everyone's reach.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Aprilia Dorsoduro 750
How to replace the engine oil and oil filter of the Aprilia Dorsoduro 750
Dorsoduro 750 Today's process will show us how to perform the routine maintenance check, replacing the motor oil and oil filter of the Aprilia Dorsoduro 750 motorc…
How do you replace the motor oil of the Aprilia Dorsoduro 750?
How do you replace the motor oil of the Aprilia Dorsoduro 750?
Dorsoduro 750 To perform the oil change on the Aprilia Dorsoduro 750, you will need to loosen the drain plug of the oil pan located in the central lower part of th…
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
Dorsoduro 750 You can change the engine oil on the Aprilia Dorsoduro 750 by loosening the drain plug on the oil sump, located at the central lower part of the bike…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos