Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch cover gasket on the Aprilia RS?

Model: Aprilia Rs 660
Part: Checks and maintenance

Video tutorial

To replace the clutch cover gasket on the Aprilia RS, first loosen the nut securing the oil drain plug, collecting the oil in a container. Next, loosen the screws of the gear lever and detach it from the clutch cover.

Then, remove all the bolts securing the cover and slide it out of its housing. After removing any other obstructing parts, install the new gasket.

Once installed, refit all previously removed parts.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Brake and Clutch Levers of the Aprilia RS 660
How to Replace the Brake and Clutch Levers of the Aprilia RS 660
Rs 660 This guide will show you how to remove and replace the brake and clutch levers of the Aprilia RS 660 motorcycle. First, place the bike on a stand and…
How to Replace the Brake and Clutch Levers on an Aprilia RS 660
How to Replace the Brake and Clutch Levers on an Aprilia RS 660
Rs 660 Briefly, here are the steps to remove and replace the front brake and clutch levers on the Aprilia RS 660 motorcycle. First, place your motorcycle on…
How do you replace the engine oil of the Aprilia RS 660?
How do you replace the engine oil of the Aprilia RS 660?
Rs 660 It will be possible to perform the oil change of the Aprilia RS 660 by unscrewing the oil cap located in the central lower part of the vehicle: once …

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos