Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Aprilia RSV 1000R?

Model: Aprilia Rsv 1000
Part: Spark plugs

Video tutorial

To replace the spark plugs on the Aprilia RSV 1000R, first, remove the bolts securing the fuel tank at the front of the motorcycle. These bolts are located between the tank and the handlebars and can be unscrewed to lift the tank.

At this point, you will have access to the components underneath, allowing you to extract the old spark plugs from their housings using a spark plug socket. Once the old spark plugs are removed, insert the new ones and lower the tank back into place.


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to replace the clutch on an Aprilia RSV 1000R?
How to replace the clutch on an Aprilia RSV 1000R?
Rsv 1000 To replace the clutch on an Aprilia RSV 1000R, you need to loosen the screws securing the cover on the right side of the bike to remove it and access…
How to Remove the Radiator from an Aprilia RSV 1000R
How to Remove the Radiator from an Aprilia RSV 1000R
Rsv 1000 This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your moto…
How to Replace the Battery of the Aprilia RSV 1000R?
How to Replace the Battery of the Aprilia RSV 1000R?
Rsv 1000 To replace the battery of the Aprilia RSV 1000R, loosen the screws securing the seat to its housing. Once these screws are loosened, you can detach t…

How to Replace the Front Headlight Bulbs on a KTM Duke 125?

Replacing the front headlight bulb on the KTM Duke 125, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is not inserted, then using a Torx screwdriver, remove both the bolts and the rivets securing the front fairing and separate it from the handlebars. Next, remove the large rubber cap located at the back of the headlight, disconnect the power connector, and unlock the metal clip. Once the bulb is extracted, insert the replacement without touching the glass directly with your bare hands, and finally reassemble everything.

Watch the video!


by ScegliAuto

More videos