Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling the Carburettor of the Aprilia RS 250

Model: Aprilia Rs 250
Part: Carburetor

Video tutorial

This guide shows the steps to disassemble and replace the carburettor, or to clean it, of the Aprilia RS 250. First, remove the rider's seat and begin by removing the fuel tank by unscrewing its screws; disconnect the fuel hose to remove it, as shown in the video.

Now disassemble the air filter box to access the carburettor; disconnect the throttle cable and the air cable, unscrewing the clamp screw to extract it from the intake duct and remove it!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Dismantling the Carburettor on a Gasgas EC 250
Dismantling the Carburettor on a Gasgas EC 250
Ec 250 In this tutorial, we will go through the steps to dismantle the carburettor on a Gasgas EC 250 enduro bike, following the instructions below. First, …
How to Dismantle the Carburettor of the Aprilia Scarabeo 150
How to Dismantle the Carburettor of the Aprilia Scarabeo 150
Scarabeo 150 Today's guide will illustrate the main steps for dismantling and replacing the carburettor on the Aprilia Scarabeo 150 scooter. First, place your sco…
Carburettor Maintenance on Aprilia Pegaso 650
Carburettor Maintenance on Aprilia Pegaso 650
Pegaso 650 The operations we are about to show you will be very useful when you suspect damage to the carburettor. The tutorial begins with the carburettor alre…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos