Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The operations we are about to show you will be very useful when you suspect damage to the carburettor. The tutorial begins with the carburettor already removed from the bike. Open the two upper covers by unscrewing the small screws (check that the covers are not cracked). Remove the diaphragm and check that it is still good; if not, replace it. Now move to the bottom of the carburettor: open these covers as well and check the float, along with the needle guide. Loosen the jets and ensure they are also free: give them a clean. Reassemble everything.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of the Aprilia Pegaso 650?
How to Replace the Battery of the Aprilia Pegaso 650?
Pegaso 650 You can replace the battery of the Aprilia Pegaso 650 by loosening the screws that secure the triangular cover panel immediately beneath the seat, on…
How to Change the Engine Oil in the Aprilia Pegaso 650?
How to Change the Engine Oil in the Aprilia Pegaso 650?
Pegaso 650 In this tutorial, you will see how to change the engine oil in the Aprilia Pegaso 650, a very simple and quick operation. First, wait for the engine …
Replacement of the engine oil and oil filter of the Aprilia Pegaso 650
Replacement of the engine oil and oil filter of the Aprilia Pegaso 650
Pegaso 650 These brief steps will guide us through the DIY process of carrying out the routine maintenance service, replacing the engine oil and oil filter, of …

How do you replace the transmission of the Piaggio Beverly 250?

In order to replace the transmission of the Piaggio Beverly 250, you need to loosen the screws that secure the air filter, located on the rear left side of the motorcycle. Once the filter has been removed, you can proceed by also loosening the screws that secure the transmission case, located just below the air filter. Once this case has been removed, you can loosen the screws that secure the variator and clutch, removing the belt around them and then replacing everything with new replacement parts.

Watch the video!


by ScegliAuto

More videos