Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Pads of the Aprilia Sportcity 125?

Model: Aprilia Sportcity 125
Part: Brake pads

Video tutorial

To replace the rear brake pads of the Aprilia Sportcity 125, loosen the screws that secure the brake caliper to its housing on the designated disc. This will allow the caliper to be removed from the disc, making it possible to extract the old pads inside.

Once the old pads are removed, insert the new ones into the caliper and position it back onto the disc. When positioned, secure the caliper to the disc by inserting the appropriate pins and tightening with the bolts.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

Sportcity 125 Below are the steps that will allow you to remove and replace (or clean) the air filter of the engine of the Aprilia Sportcity 125 scooter. First, pl…
Sportcity 125 Let's see how to remove the rear wheel and replace the brake disc on an Aprilia Sportcity 125 scooter. First, unscrew the 8mm bolts of the exhaust si…
Sportcity 125 In this video tutorial, you will learn how to remove the engine cover on the transmission side of the Aprilia Sportcity 125 scooter by following thes…

How to Set the Time on a Suzuki Burgman 650 Scooter?

In this tutorial, you will learn how to set the time on a Suzuki Burgman 650 scooter, a very simple and quick operation to perform after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument panel and press the two buttons located below the display until the clock starts to flash. At this point, adjust the hour using the "Select" button, set the minutes with the "Adjust" button, and save the setting by pressing both buttons again.

Watch the video!


by ScegliAuto

More videos