Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Belt and Variator from the Aprilia SR MAX

Model: Aprilia Sr Max
Part:

Video tutorial

In this brief and simple guide, follow the instructions to remove and replace the drive belt and variator of the Aprilia SR MAX scooter. First, place the scooter on its centre stand and start unscrewing the screws of the transmission cover to remove it. Next, unscrew the central nut of the fan and clutch bell to take them off, as shown in the video.

Now, remove the drive belt and variator, replacing the rollers if necessary; then refit all the transmission components.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Remove the Belt, Variator, and Rollers on the Aprilia Leonardo 125
How to Remove the Belt, Variator, and Rollers on the Aprilia Leonardo 125
Leonardo Let’s briefly go through the steps to remove and replace the variator, rollers, and drive belt of the Aprilia Leonardo 125 scooter. First, place your…
How to Replace the Variator on an Aprilia SR 50
How to Replace the Variator on an Aprilia SR 50
Sr 50 This guide outlines the steps to remove and replace the variator on the Aprilia SR 50 scooter, following the instructions below. First, place the cen…
How to replace the belt on the Aprilia SR 50?
How to replace the belt on the Aprilia SR 50?
Sr 50 To replace the belt on the Aprilia SR 50, first loosen all the screws securing the cover of the casing near the rear wheel. Once the casing is open, …

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos