Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on an Aprilia Dorsoduro 750

Model: Aprilia Dorsoduro 750
Part: Pump

Video tutorial

To replace the water pump on an Aprilia Dorsoduro 750, first remove the screws securing the right side fairing of the bike, located near the fuel tank. Once the fairing is removed, you will be able to locate the water hose underneath, which must be detached from the water pump by removing the retaining ring.

The pump can now be removed from its housing on the right side of the bike by unscrewing the fixing screws. After the old pump has been freed, insert the new one, connecting and securing it properly.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the Aprilia Dorsoduro 750?
How do you replace the motor oil of the Aprilia Dorsoduro 750?
Dorsoduro 750 To perform the oil change on the Aprilia Dorsoduro 750, you will need to loosen the drain plug of the oil pan located in the central lower part of th…
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
Dorsoduro 750 You can change the engine oil on the Aprilia Dorsoduro 750 by loosening the drain plug on the oil sump, which is located at the bottom of the bike: p…
How do you replace the muffler of the Aprilia Dorsoduro 750?
How do you replace the muffler of the Aprilia Dorsoduro 750?
Dorsoduro 750 In order to replace the exhaust of the Aprilia Dorsoduro 750, you need to loosen the screws that secure the component to its housing: this will be lo…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos