Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the brake and clutch levers on an Aprilia Tuono V4 1100RR, completely unscrew the washer located at the end of the cable, near the lever. This will allow the cable to be fully disconnected from the lever. Then, remove the lever from its housing by unscrewing the nut at the base of the pin that secures it. After removing the nut and pin, you can completely take off the lever and replace it with a new one. Connect the new lever to the cable and secure it with the pin, ensuring everything functions correctly.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the sliders on an Aprilia Tuono V4 1100RR?
How to replace the sliders on an Aprilia Tuono V4 1100RR?
Tuono V4 1100rr To replace the sliders on an Aprilia Tuono V4 1100RR, simply remove the old ones. Start with the rear wheel, where you can loosen the nut that secure…
How do you replace the rearview mirrors of the Aprilia Tuono V4 1100RR?
How do you replace the rearview mirrors of the Aprilia Tuono V4 1100RR?
Tuono V4 1100rr In order to replace the rearview mirrors of the Aprilia Tuono V4 1100RR, you need to loosen the nuts that secure them to their base, immediately behi…
How to install the rear wheel of the Aprilia Tuono V4 1100RR
How to install the rear wheel of the Aprilia Tuono V4 1100RR
Tuono V4 1100rr Let's briefly go over the instructions that will allow us to install the rear wheel of the Aprilia Tuono V4 1100RR in simple steps. First, we will in…

How to Access the Battery in the Benelli 180S?

In this tutorial, you will see how to access the battery in the Benelli 180S, a very simple operation useful if you need to recharge or replace it. First, ensure that the key is not inserted, then remove the passenger seat and, using the provided keys, unscrew the two bolts securing the rider's seat. Once removed, unscrew the screws of the upper plastic bracket, disconnect both terminals starting with the negative, and extract the battery from its housing. To install a replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos