|
Do it yourself
| |||
| ||||
Model: Aprilia Sr 50
To reset the Service light on an Aprilia SR 50, press and hold the yellow button located at the back of the left-hand side of the handlebar. While holding this button, insert the ignition key into the ignition switch, turn it, and switch on the instrument cluster. Continue to hold the button even after the ignition is on, and you will notice that the Service light will be correctly reset. You can then release the button and switch off the instrument cluster.
Updated on 19 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Sr 50
Before you begin, sit on the seat of your Aprilia SR 50. Start by turning the key in the ignition switch to activate the instrument panel. Next, pres…
Sr 50
This guide will show you how to remove and replace the front brake pads on an Aprilia SR 50 scooter, following the instructions below. First, place y…
Sr 50
This guide outlines the steps to remove and replace the variator on the Aprilia SR 50 scooter, following the instructions below. First, place the cen…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
