Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the transmission of the Aprilia SR 50?

Model: Aprilia Sr 50
Part: Drivetrain

Video tutorial

In order to replace the transmission of the Aprilia SR 50, you need to loosen the screws that fix the casing to its housing, near the rear wheel on the left side of the bike: once the casing has been removed, you will be able to locate the underlying components.

The central nut that fixes the variator must be loosened, and the same must be done with those that fix the clutch discs: the corresponding belt around them can be removed so that the new one can be inserted and then verify that everything works.


Posted on 12 January 2025 by ScegliAuto


Related tutorials

Sr 50 To replace the transmission of the Aprilia SR 50, you need to loosen the screws that secure the cover located at the rear wheel, on the left side of …
Sr 50 Here are the main steps to remove and replace the drive belt on the Aprilia SR 50 scooter. First, place your scooter on the central stand and start u…
Sr 50 This guide outlines the steps to remove and replace the variator on the Aprilia SR 50 scooter, following the instructions below. First, place the cen…

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos