Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the transmission of the Aprilia SR 50?

Model: Aprilia Sr 50
Part: Drivetrain

Video tutorial

To replace the transmission of the Aprilia SR 50, you need to loosen the screws that secure the cover located at the rear wheel, on the left side of the bike: once this cover has been opened, you will be able to loosen the screws that secure the variator and the clutch underneath.

These components will need to be removed along with the corresponding belt so that the new parts can be installed; after assembly, everything must be closed with the cover to ensure that the transmission works correctly.


Posted on 14 January 2026 by ScegliAuto


Related tutorials

Sr 50 Here are the main steps to remove and replace the drive belt on the Aprilia SR 50 scooter. First, place your scooter on the central stand and start u…
Sr 50 In order to replace the transmission of the Aprilia SR 50, you need to loosen the screws that fix the casing to its housing, near the rear wheel on t…
Sr 50 This guide outlines the steps to remove and replace the variator on the Aprilia SR 50 scooter, following the instructions below. First, place the cen…

How to Replace the Coolant in the KTM XC 300

Follow this guide on how to replace the coolant in the KTM XC 300 enduro bike, as well as the XC-W 300. First, place your bike on a stand and start by unscrewing the coolant drain screw located at the bottom of the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap as shown in the video. At this point, top up with new coolant suitable for your radiator, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos