Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Aprilia Shiver 750

Model: Aprilia Shiver 750
Part: Air filter

Video tutorial

Today's guide will illustrate the main instructions for disassembling and replacing the air filter and spark plugs on the Aprilia Shiver 750 motorcycle. First, place the motorcycle on a stand and start unscrewing the screws securing the tank, disconnecting the fuel line and the electrical connector to remove it; then you will find the spark plugs and the air filter box underneath, as shown in the video.

At this point, remove and replace the air filter cartridge, then disconnect the spark plug connectors to unscrew and replace them, following the video tutorial to the end!


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Aprilia Shiver 750
How to Replace the Air Filter on the Aprilia Shiver 750
Shiver 750 To replace the air filter on the Aprilia Shiver 750, you need to loosen the screws securing the fuel tank to its housing so that it can be lifted. On…
Replacing the air filter on the Aprilia Shiver
Replacing the air filter on the Aprilia Shiver
Shiver 750 In today's video tutorial, we will see step-by-step instructions for removing and replacing the engine air filter on the Aprilia Shiver 750. First, r…
How to Change the Engine Oil of the Aprilia Shiver 750?
How to Change the Engine Oil of the Aprilia Shiver 750?
Shiver 750 To change the engine oil of the Aprilia Shiver 750, unscrew the oil drain plug located on the lower side of the bike to collect all the used oil in a…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos