|
Do it yourself
| |||
| ||||
How to Change the Engine Oil of the Aprilia Shiver 750?
Model: Aprilia Shiver 750
Video tutorial
To change the engine oil of the Aprilia Shiver 750, unscrew the oil drain plug located on the lower side of the bike to collect all the used oil in a suitably positioned container. Once the oil has drained, close the drain plug and unscrew the oil filter located above it. After removing the old filter and replacing it with a new one, top up the oil through the designated breather on the right side of the bike.
Updated on 22 May 2026 by ScegliAuto
Related tutorials
Shiver 750
To replace the battery on the Aprilia Shiver 750, detach the seat from its housing to access the components underneath: here you will find the batter…
Shiver 750
In this short and simple guide, follow the steps to replace the coolant in the Aprilia Shiver 750. First, place the bike on its stand and start remov…
Shiver 750
In this guide, you will learn the steps necessary to bleed the cooling system of the Aprilia Shiver 750 motorcycle. First, place the bike on its stan…
|
How to Dismantle the Centre Fairing of the Piaggio MP3
Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |