Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Bleed the Cooling System of the Aprilia Shiver 750

Model: Aprilia Shiver 750
Part: Antifreeze coolant

Video tutorial

In this guide, you will learn the steps necessary to bleed the cooling system of the Aprilia Shiver 750 motorcycle. First, place the bike on its stand and disconnect the radiator hose fixed to the water pump casing.

Allow the fluid to drain into a container for about ten minutes, as shown in the video. Next, unscrew the radiator cap and top up with new coolant, pouring in the appropriate type.

Fill the reservoir until it reaches the maximum level mark!


Updated on 29 June 2026 by ScegliAuto


Related tutorials

Replace the Coolant in the Aprilia Shiver 750
Replace the Coolant in the Aprilia Shiver 750
Shiver 750 In this short and simple guide, follow the steps to replace the coolant in the Aprilia Shiver 750. First, place the bike on its stand and start remov…
How to Replace the Coolant in the Aprilia Shiver 750?
How to Replace the Coolant in the Aprilia Shiver 750?
Shiver 750 To replace the coolant in the Aprilia Shiver 750, position a container under the drain hose to collect the old fluid. The hose must be disconnected f…
How to Replace the Battery of the Aprilia Shiver 750?
How to Replace the Battery of the Aprilia Shiver 750?
Shiver 750 To replace the battery on the Aprilia Shiver 750, detach the seat from its housing to access the components underneath: here you will find the batter…

How to remove the seat on a Yamaha Tracer 9 GT?

In this tutorial, you can see how to remove the seat on a Yamaha Tracer 9 GT, a very simple and quick operation, for example, if you need to access the battery. First, remove the passenger seat by inserting the key into the designated lock, then locate the indicated rubber element and remove it by pulling it outwards. Next, insert your hand into the indicated gap, hold down the release lever, and simultaneously detach the seat from the support. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos