Do it yourself
Frequently asked questions about cars and motorcycles
To replace the coolant in the Aprilia Shiver 750, position a container under the drain hose to collect the old fluid. The hose must be disconnected from the radiator after loosening the retaining ring. To facilitate the fluid's exit, it is necessary to open the top-up cap as well. When finished, open the cover that protects the impeller to complete the draining of the fluid from the cooling circuit. Then, the cover must be refitted, and you can top up with the new coolant.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Shiver 750 To replace the coolant on an Aprilia Shiver 750, first remove the right side panel by loosening all the bolts with an Allen key. Use a screwdriver to…
Shiver 750 In this guide, you will learn the steps necessary to bleed the cooling system of the Aprilia Shiver 750 motorcycle. First, place the bike on its stan…
Shiver 750 In this short and simple guide, follow the steps to replace the coolant in the Aprilia Shiver 750. First, place the bike on its stand and start remov…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos