Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Tuareg 660
Part: Clock

Below we will see the instructions that will allow us to set the time on the Aprilia Tuareg 660 motorcycle, in simple and quick steps. First, put the motorcycle on the stand and turn on the instrument panel; then go to the settings of the onboard computer menu and use the arrow keys to go to the display option, as shown in the video. At this point, we will find the time setting, which we will then set using the arrow keys; now exit the menu to save the changes made, turning off the instrument panel and starting the engine!

Posted on 18 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear tyre on the Aprilia Tuareg 660
How to replace the rear tyre on the Aprilia Tuareg 660
Tuareg 660 In this guide, we will provide instructions for removing and replacing the rear tyre on the Aprilia Tuareg 660. First, place the motorcycle on a stan…
How do you replace the air filter of the Aprilia Tuareg 660?
How do you replace the air filter of the Aprilia Tuareg 660?
Tuareg 660 The replacement of the air filter of the Aprilia Tuareg 660 can be done by loosening the screws that fix the panel located in the front of the vehicl…
How to Replace the Air Filter on an Aprilia Tuareg 660
How to Replace the Air Filter on an Aprilia Tuareg 660
Tuareg 660 You can replace the air filter on the Aprilia Tuareg 660 by loosening the screws that secure the panel located at the front of the bike, just below t…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos