Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the exhaust pipe of the Aprilia Tuareg 660, you need to go and widen the ring that connects the exhaust terminal to the remaining part of the exhaust duct, on the right side of the motorcycle: once this ring has been removed, it will be possible to proceed by unscrewing the screw that fixes the exhaust to its housing, in the upper part of the fender. Once this screw has been removed, it will be possible to completely detach the old exhaust so that the new one can be inserted; after installation, it will be necessary to fix and connect it correctly to verify that everything is functioning properly.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Aprilia Tuareg 660?
How do you replace the air filter of the Aprilia Tuareg 660?
Tuareg 660 In order to replace the air filter of the Aprilia Tuareg 660, you need to loosen the screws that secure the panel located in the front of the motorcy…
How to replace the rear tyre on the Aprilia Tuareg 660
How to replace the rear tyre on the Aprilia Tuareg 660
Tuareg 660 In this guide, we will provide instructions for removing and replacing the rear tyre on the Aprilia Tuareg 660. First, place the motorcycle on a stan…
How to replace the sprocket of the Aprilia Tuareg 660
How to replace the sprocket of the Aprilia Tuareg 660
Tuareg 660 Today we will discover the instructions that will allow us to disassemble and replace the sprocket of the transmission of the Aprilia Tuareg 660 moto…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos