Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fork on an Aprilia Tuono

Model: Aprilia Tuono
Part:

Video tutorial

Position the motorcycle on a rear workshop stand to lift the front wheel. Remove the front wheel to access the fork.

Loosen the nuts on the upper fork clamps. This can be done without removing the tank.

Loosen the fork caps to release the air pressure. Slide the stanchions out from the top of the fork.

Empty the stanchions and clean them: remove the springs and other internal components. Clean the stanchions and replace any damaged seals or dust seals.

Fill them with the recommended oil from the manual and leave the specified amount of air. Refit the stanchions and tighten them properly: ensure they are securely fastened and proceed with the complete reassembly.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Aprilia Tuono?
How do you replace the exhaust pipe of the Aprilia Tuono?
Tuono The procedure for replacing the exhaust on the Aprilia Tuono can be carried out by loosening the fixing screws that secure the terminal to its housin…
How to Replace the Headlight Bulb on an Aprilia Tuono
How to Replace the Headlight Bulb on an Aprilia Tuono
Tuono Today's main steps will show you how to remove and replace the dipped beam bulb of the front headlight on an Aprilia Tuono motorcycle. First, place t…
How to Replace the Air Filter on an Aprilia Tuono
How to Replace the Air Filter on an Aprilia Tuono
Tuono To replace the air filter on the Aprilia Tuono, loosen the screws securing the seat and remove it. The next step is to remove the fairing parts locat…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos