Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Audi A1
    4. : Front bumper

Audi A1 - Front bumper

Front Bumper Audi A1 (2010-2018 / 8 x, mk 1)

Audi A1 (2010-2018 / 8X, MK 1)
How to Remove the Front Bumper of an Audi A1
To remove the front bumper on an Audi A1, start by lifting the vehicle to access the underside of the bumper. Remove the screws and clips located under the …Read all…
Posted on 9 April 2026 by ScegliAuto
Audi A1 (2010-2018 / 8X, MK 1)
How to Remove and Replace the Front Bumper of the Audi A1
Follow these simple steps to remove and replace the front bumper of the Audi A1. First, open the bonnet and start by removing the plastic clips located at the …Read all…
Posted on 19 September 2026 by ScegliAuto
Airbag (6) Antenna (1) Car stereo (3) Battery (2) Grille (1) Body (3) Control unit (1) Key (17) Timing belt (2) Air conditioner (1) Onboard computer (6) Checks and maintenance (13) Dashboard (1) Headlight (9) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (9) Diesel fuel filter (1) Oil filter (1) Parking brake (1) Window switch (1) Accessory kit (1) Light bulb (1) Headlight bulb (11) Tail light bulb (4) Interior dome light bulb (1) Handle (2) Exhaust muffler (1) Engine oil (1) Clock (11) Door trim panel (4) Front bumper (2) Brake pads (1) Instrument cluster (1) Heater core (1) Wheel (1) Fuse box (36) Seat (1) Brake system (1) Side mirror (2) Warning light – error code (11) (16) Tire pressure warning light (7) Service warning light (47) Fuel cap (6)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos