Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Chain on an Audi A4?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

To replace the timing chain on an Audi A4, lift the car with a jack so that the front right wheel can be removed; you will also need to detach the corresponding wheel well. Once these elements are removed, you can locate the chain, which can be taken out of its housing after removing the tensioner; at this point, you can insert the new chain around the corresponding sprockets to put it under tension.

Finally, reinstall all the removed components and check their operation.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Chain on the Audi A4 2.0T
Guide to Replacing the Timing Chain on the Audi A4 2.0T
Audi A4 (2007-2016 / B8) Today's information will show you how to disassemble and replace the timing chain on the Audi A4 2.0T, following the instructions below. First, open …
How to Replace the Timing Chain on the Audi A4 2.0 TFSI
How to Replace the Timing Chain on the Audi A4 2.0 TFSI
Audi A4 (2007-2016 / B8) In a few simple steps, remove and replace the timing chain on the Audi A4 2.0 TFSI. First, open the hood of the vehicle and start by removing the fro…
Guide to Disassembling the Camshaft of the Audi A4 2.0 TFSI
Guide to Disassembling the Camshaft of the Audi A4 2.0 TFSI
Audi A4 (2007-2016 / B8) In this guide, you will see the main steps for disassembling and replacing the camshaft of the Audi A4 2.0 TFSI. To disassemble the camshaft, you mus…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos