Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Handles on an Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Handle

To perform this simple operation, disconnect the battery to protect any sensitive circuits. Next, open the door you are working on. You will also need to remove the door panel to access the handle in question. Then, disconnect the motor that controls the central locking of your vehicle. Remove the water seal as well, which will allow you to access all the bolts shown in the video to then remove the entire window assembly and its trim. Now you can extract the old handle and replace it with the new one.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the diesel pump in the Audi A4?
How to replace the diesel pump in the Audi A4?
Audi A4 (2004-2008 / B7) In the Audi A4 b6 and b7, to replace the diesel pump, the bottom of the luggage compartment must be removed, in this video tutorial we can see how to…
Audi A4 headliner replacement
Audi A4 headliner replacement
Audi A4 (2004-2008 / B7) In this video tutorial we will see how to remove the roof liner of an Audi A4. First of all, we go inside the car and remove the interior lights, lev…
How to remove the headliner of an Audi A4
How to remove the headliner of an Audi A4
Audi A4 (1994-2000 / B5) How to remove the headliner of an Audi A4? Let's see how to proceed with the disassembly. We begin to disassemble the side handles of the sky with a …

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos