Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the third brake light on the Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Headlight bulb

Today's steps will show us how to disassemble and replace the third brake light on the Audi A4. First, we open the rear trunk door and start removing the plastic cover located at the third brake light, on the rear part; then we push on the clips of the third brake light to remove it from the outside, disconnecting the electrical connector of the lights, as shown in the video. At this point, we replace the brake light bulbs or, if necessary, the entire rear light, applying the reverse process for reassembly!

Posted on 20 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2014-2024 / B9) Today's instructions will allow us to disassemble and replace the tail light or third brake light of the Audi A4, in simple and quick steps. First, w…
Audi A4 (2000-2004 / B6) In this tutorial we can see how to remove the third brake light in the Audi A4, an extremely simple and quick operation. First of all, make sure that…
Audi A4 (2007-2016 / B8) In order to replace the third brake light bulb of the Audi A4, you need to access the interior of the car to locate the internal covering of the thir…

    Frequently Asked Questions

    • A4 2014-2024 - How to replace the xenon lamp on the Audi A4 b8? Read answer
    • A4 1994-2000 - How to replace the headlight bulb on an Audi A4? Read answer
    • A4 1994-2000 - How to replace the headlight bulb on an Audi A4? Read answer

How to Remove the Fuel Pump from the Tank on an Opel Astra

How to remove the fuel pump from the tank on an Opel Astra? First, disconnect the battery cables. Next, remove the rear seat cushions from the car. Use a socket spanner to unscrew the securing screws of the metal cap (located on the metal panel), then remove it from its seat. Use absorbent paper around the perimeter to soak up any liquid leaks. Unscrew the large securing bolt of the fuel pump (if present on the model), disconnect the power connectors and the liquid circulation pipes. Extract the floating fuel pump from its seat along with any attached parts. Finally, refit a new piece.

Watch the video!


by ScegliAuto

More videos