Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear trunk cover on an Audi A4 vehicle

Model: Audi A4 B8 - Years 2007-2016

In case it is necessary to remove the rear bumper of an Audi A4 B8 model vehicle, first you need to remove the rear interior part of the trunk. Its removal is very simple, you just need to insert a plastic tool to lever it up slightly and then remove it by pulling it outwards. Be careful not to damage the closing clips because if you damage even just one, you may have difficulty in reassembling the cover. After that, you can proceed as you see fit for the exterior work on the vehicle.

Posted on 11 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seat of the Audi A4
How to remove the rear seat of the Audi A4
Audi A4 (2007-2016 / B8) The removal of the rear seat or rear bench of an Audi A4 vehicle follows a very simple procedure, which can be carried out independently thanks to ou…
How to remove the steering wheel airbag of the 2014 Audi A4
How to remove the steering wheel airbag of the 2014 Audi A4
Audi A4 (2014-2024 / B9) Today we will explain how to remove the steering wheel airbag on a 2017 Audi A4 independently. To perform this operation, it is necessary to rotate t…
How to remove the front bumper of the Audi A4 B8 version
How to remove the front bumper of the Audi A4 B8 version
Audi A4 (2007-2016 / B8) In this video we can see how to remove the front bumper from the Audi A4 B8 version: we will start by removing the screws in the front wheel arches, …

    Frequently Asked Questions

    • A4 2004-2008 - How much does it cost to change ownership of an Audi A4 1.9 TDI? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos